The sawing unit
Optimized block disposal coupled with fastest sawing processes
During development of the new K2-Industry, we focused on providing maximum productivity and efficiency. This also goes for the sawing unit, which now offers 13 kW capacity at 1,500 rpm and boasts optimized block disposal.
In conjunction with the perfect table overlay, open sawing table and intelligent CAMBIUM software, there are practically no limits when it comes to the efficient production of your product ideas.
- High-precision, fully automatic jack rafter cuts, hex cuts, regenerative cuts or diagonal cuts
- At every angle, every inclination and every length
- Channelling and hip ridge cuts, as well as grooves of any length
- Blocking grooves in any width and at any angle.
The table overlay is made of robust plastic and offers first-class sliding properties. This avoids all abrasion on the timber and ensures precision during processing thanks to minimized sliding friction.
The sawing table, open on half a side, reveals its strengths from the very first saw cut. Depending on the dimensions, a block ejector is now often no longer required, which leads to considerable time savings in a run. The ingenious thing here is that CAMBIUM automatically determines whether a block fits through the opening. If it doesn’t, a support surface is generated by rotating the saw, and the block can be ejected.
The advantages:
- Drive rating 13 kW The table overlay is made of robust plastic for minimized sliding friction
- Open sawing table for higher efficiency in a run
Universal mill with 4 or 5 axes
Three times the power with 35kW high-performance unit
The standard version is fitted with an 15 kW unit, but the new 5-axis universal mill can also be fitted with the new 35 kW high-performance unit on request, thereby tripling the capacity.
All axes are equipped with servo drives, which enables not only maximum speed and precision, but also simultaneous repositioning. Both the timber overlay surface and the use of space are optimized thanks to the adapted geometry. For the mill, too, the table overlay is made of robust plastic and therefore offers best sliding properties.
Abrasion on the timber is therefore a thing of the past, and the precision during processing is increased thanks to the minimized sliding friction.
Instead of 5 axes, the K2-Industry can alternatively or additionally be fitted with a 4-axis unit instead of a 5-axis unit.
The advantages:
- Direct drive without intermediate gearing
- Infinitely variable speed from 0 to 5,200 rotations per minute
- 3 tools can be installed simultaneously
Highly efficient milling of tenons, mortises, cloggings, profiles, bird's mouths, dovetails joints, etc. - Cylindrical mills, end mills and dovetail mills or special tools are available
- Excellent performance and impressive availability
The 6-axis ROBOT unit.
The 6-axis all-rounder for fastest processing
The 6-axis ROBOT unit with a power rating of 12 kW or 29 kW and infinitely variable speed from 0 up to 15,000 rpm caters for every need.<br/> The magazine of the tool changer provides space for 17 different tools.<br/> In combination with HSK-63-E tool holders, the tool changer can change over saw blades, drill bits, end mills, side milling cutters, dovetail mills, cylindrical mills and markers for labelling parts in seconds.<br/> The tools are managed in the Hundegger production program CAMBIUM. Depending on the type of processing to be performed, the machine automatically selects the appropriate tool from the magazine. Apart from the type, diameter, length and tool position in the magazine, the characteristic data of the milling and drilling tools also includes the optimal speed. The speed is called up automatically when the respective tool is used.<br/>
The advantages:
- Greater flexibility thanks to the 6-axis ROBOT technology
- Machining at all angles and inclinations
- Machining on all part sides without turning
The universal sheet mill
A quantum leap in the modular construction method
The universal sheet mill was developed especially for typical operations in modular construction, such as recesses and markings on purlins.
Thanks to the unique Hundegger 2-hand transport system, the part is clamped and held down on the processing surface and at the same time, continuous workpiece transport is ensured without unnecessary re-clamping.
The result: high-precision parts even from warped or twisted raw material, and maximum throughput.
Drilling, milling and slotting at the highest level
Simultaneous working for maximum economic efficiency
Simultaneous processing is a prerequisite for maximum economic efficiency and higher productivity. The Hundegger synchronous unit on the K2-Industry meets these requirements with a unique concept.
In many cases, performance can be increased further through the simultaneous execution of operations lying opposite each other. Through the arrangement of two units on exactly one axis, the K2-Industry can be used to execute both horizontal and vertical operations simultaneously to ensure maximum economic efficiency.
The advantages:
- Simultaneous operations on two opposite sides of the part
- Fast, accurate and splinter-free machining
- Maximum efficiency during milling, drilling and slotting
The horizontal saw
The all-rounder providing processes in one
In addition to the production of high-precision slots, the horizontal saw can also be used to produce large recesses.<br/> Thanks to the clever interplay between the horizontal saw and the sawing unit, large recesses can now be completely sawn rather than milled in an even shorter space of time.<br/> The size of the resulting scrap pieces can be adapted to the downstream disposal solution.
