OPTIONS
Optional water-cooled high-performance spindle
If you need even higher performance, the ROBOT unit can alternatively be equipped with a water-cooled 29 kW high-performance spindle with up to 15,000 rpm.
This allows you to create large recesses, rebates or cutouts, for example, quickly and at high quality while also achieving maximum economic efficiency.
Drill units
Optionally, up to two horizontal drill units can be installed on the ROBOT unit.
This allows holes for rafter nails, purlin doubling and so on up to a depth of max. 525 mm to be made without having to change tools.
Additional tool storage
Everything ready to hand: Additional tool storage is provided for a tool with a diameter of up to 500 mm as well as a slot cutter.
Exchangeable slot cutter
Precise slot cutting: To make perfect slots, the robot unit can be automatically equipped with a slot cutter.
It approaches the parts from all six sides and processes them at all angles and inclinations up to a depth of 300 mm.
Labelling systems
Powerful ink jet systems both on the ROBOT arm and in the intake area label the parts with text, graphics or barcode.
Various ink colours are available.
Marking function
The marking device integrated in the saw/slot unit is able to mark rafter divisions on purlins or post divisions on ground plates and top plates:
in seconds and on three sides of the part without a tool change.
Central lubrication
This system supplies all lubrication points automatically with lubricant, and always at the right time.
This reduces manual maintenance considerably.
Downholder rollers
When you process large-format, thin panels, these are held in position perfectly on the operator side by downholder rollers.
Performance boost package RD
You'd like even higher performance? The ROBOT-Drive performance boost package increases the speed of cutting in particular.
This is achieved by means of optimized software and a modified outfeed system.
The items supplied include an outfeed chain with servo motor as well as an ejector with frequency converter and encoder.
Short part flap with conveyor belt
This is a very convenient feature: A “drawer” integrated in the machine accommodates short parts and then transports them out of the machine via a small conveyor belt.
Label printer
Printer on the operating desk for labels with various, freely selectable details such as, e.g., company name, part name, part number, cut grades or roof side.
Data can also be imported from joinery and CAD programs.
Additional screen at part discharge point
An additional screen can be installed above the part discharge point.
The fully machined parts are displayed here.